Screeds
For ease of use, we have divided screeds into two groups i.e. High Impact Resistant and High Impact – High Temperature.
Each product carries a very brief description, with the Data Sheet giving detailed technical specifications and guides on the use of the product and its application.
If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email: enquiries@klbresins.com
Screeds – High Impact Resistant – 6mm
KLB EP 150 is a low-viscosity epoxy resin for producing decorative reaction resin coatings using colored and natural sand. EP 150 is an easy-to-apply mortar system. Due to its special composition, the resin has low yellowing properties and is especially suitable for decorative mortar coatings. In addition, it can be used to produce base coats, leveling coats, and scratch coats.
Download Data Sheet for KLB EP 150
KLB EP 99
KLB EP 99 is a formulated, 2-component epoxy-resin binding agent that combines with aggregates to produce an economical coating for industrial and commercial flooring. The product is mixed on site with graded aggregates for the particular application and coating thickness. Since it is supplied as a filler-free binding agent, the product can be economically extended with the desired aggregate. Mixing allows easy application using a rake and produces a coating of very high technical quality.
Download Data Sheet for KLB EP 99
Screeds – High Impact – High Temperature
KLB PU 4009 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to hot water and chemicals. Therefore, KLB PU 4009 is primarily used in the food industry, e.g. production areas in breweries, dairies, abattoirs, butchery departments, etc. and also in areas where chemicals are used.
Download Data Sheet for KLB PU 4009
KLB PU 4006
KLB PU 4006 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to water and chemicals. Therefore, KLB PU 4006 is primarily used in the food industry and also in areas where chemicals are used.
Download Data Sheet for KLB PU 4006
KLB PU 4012
KLB PU 4012 is a high-quality, low-slump, 3-component, polyurethane mortar coating for flooring that is resistant to chemicals and to hot water. KLB PU 4012 is a system product that is used to complement KLB 4006, 4009 and PU 4010 Grip when forming straight and coved plinths and skirtings. It is therefore primarily used in areas the food industry where there is high exposure to wetting and hot water, e.g. in production areas in breweries, dairies, abattoirs, butchery departments, etc. and also in other areas with high exposure to chemicals.
Levelling Screeds
Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.
If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email: enquiries@klbresins.com
KLB PU 410 – ‘Comfort Floor (resin)’ – Ultra Violet Resistant is a high-quality, self-flow coating based on liquid, 2-component polyurethane resin. PU 410 is used to produce flexible floor coatings primarily in interior locations and with sound-absorbing and decorative properties. It is used in areas in which good wear properties, comfort and pleasant appearance are required, such as in exhibition areas, offices and showrooms, hospitals, etc. Unlike the usual, industrial polyurethane coatings, PU 410 is made from light-fast raw materials and can be produced in light, decorative colours as the finished coating has excellent colour stability.
Download Data Sheet for KLB PU 410
KLB PU 420 ‘Comfort Floor (resin)’
KLB PU 420 ‘Comfort Floor (resin)’ is a self-flow, solvent-free, 2-component polyurethane coating for smooth, hard-resilient coatings and for slip-resistant scatter-coatings.
The material has good flow and smoothing properties and sets well with almost no shrinkage.
Download Data Sheet for KLB PU 420
KLB EP 200 VF
KLB EP 200 VF is a solvent-free, pigmented, self-flow coating based on 2-component epoxy resin with excellent flow and smoothing properties. Due to its good flow performance, coatings can be applied from 1.5 mm up to any desired thickness according to demand and with due regard to wear factors.
Download Data Sheet for KLB EP 200VF
KLB EP 213
KLB EP 213 is a self-leveling, solvent-free, 2-component, epoxy-resin coating for a hard and smooth surface finish as well as mixed or scatter-coat finishes, ideally for use in industrial locations. The material has excellent flow, smoothing, and setting properties EP 213 can be mixed with quartz sand, which is both beneficial and economical for thickness above 3 mm. EP 213, for a standard coating product, has excellent resistance to chemicals.
Download Data Sheet for KLB EP 213
KLB EP 260 [Terrazzo (mini)]
KLB EP 260 [Terrazzo (mini)] is a solvent-free, ready to use and self-levelling, 2-component epoxy resin free-flow material for producing smooth coating finishes. Due to the special additives, the coating has a decorative surface similar to granite.
The hardened coating is suitable for use in commercial and industrial locations in which special demands are placed on decorative appearance. Available in four standard shades.
Download Data Sheet for KLB EP 260
KLB EP 280 WHG
KLB EP 280 WHG is a solvent-free, electrically conductive, and crack-covering, 2-component epoxy resin free-flow coating with excellent chemical resistance.
The coating is suitable for use in collection bays and areas, such as in production/handling areas and storage/packing areas that must be equipped with approved coating systems.
The conductive property ensures protection against explosion whereby the product is especially suitable for production areas in the chemicals and pharmaceuticals industries, in laboratories, and also in other manufacturing with high exposure to chemicals.
The product will withstand forklift-truck traffic. It also has good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis, and salts.
Download Data Sheet for KLB EP 280
Colours: 12 standard RAL colours
Colours: 12 standard RAL colours
Repair Mortars
Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.
If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email: enquiries@klbresins.com
KLB EP 51 RAPID S is a solvent-free, 2-component epoxy resin that cures at low temperatures and, at normal temperatures, cures rapidly. It is used as a primer and smoothing coat in cases where a fast coating installation is required.
EP 51 RAPID S can usually be over-coated after 2 – 4 hours and has, therefore, a great time advantage over other primers. The use of EP 51 RAPID S offers considerable time savings in small areas and in renovation work with short installation and setting times. EP 51 RAPID S cures reliably even at temperatures down to 0°C and this is a considerable advantage in the colder seasons of the year.
Introduction of dried quartz up to 0.3mm will give a fine finish whereas dried quartz up to 3.0mm will give a coarse finish.
Download Data Sheet for KLB EP 51 Rapid
Clear Sealers
Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.
If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email: enquiries@klbresins.com
KLB PU 800 E Satin is a high quality, colourless, 2-component polyurethane seal-coat that is used as a matt finish on epoxy-resin and polyurethane coatings. PU 800 E is based on a new, environment protective technology, represents an excellent alternative to solvent-based seal products and can be used in a wide range of areas. Application is by mohair- or velour- roller using cross-strokes. Due to its very low solvent content, no expensive protective measures are required. Due to its drying performance, very consistent and “beautiful” surfaces can be produced.
Download Data Sheet for PU 800E
KLB EP 700 E Matt
KLB EP 700 E Matt is a 2-component epoxy resin emulsion that can be thinned with water and contains only a very small quantity of solvent for reasons of quality improvement. EP 700 E is used as a matt top-coat seal on reaction resin coatings. It produces a uniform, silk-matt surface finish that gives the coating a consistent appearance as the “reflection effect” of gloss coatings from light dispersion is completely eliminated.
Download Data Sheet for EP 700 E
KLB EP 175 S
KLB EP 175 S is a high quality, 2-component epoxy resin preparation for clear seal-finishing on décor mortar and décor scatter coatings. EP 175 S is used for top-sealing colours and scatter-coatings for use in slip-resistant wet areas such as, e.g. kitchens, abattoirs, fish and food industries. For trowel applied surface sealing and smoothing of décor and terrazzo flooring.
Application as a filler-sealer is completed in several applications. The product has little inherent color and, with careful application, gives a visually uniform and good appearance. As the product is based on epoxy resin, it is possible to use it in areas where there is a demand for mechanical and chemical resistance. Surfaces are abrasion and wear-resistant, hygienic, and easy to clean. EP 175 S has good color stability.
Download Data Sheet for EP 175 S
KLB PU 881 EL+ [E.S.D. – antistatic]
KLB PU 881 EL+ [E.S.D. – antistatic] is a solvent based, 2-componepolyurethane seal with a silk matt surface finish. PU 881 EL+ contains solvents but has a high solids content. The product is used for producing uniform, matt surfaces on electrically conductive industrial and commercial flooring. It is notable for its high covering power and uniform, streak-free application. The seal is always used in combination with conductive coatings, EP 200 EL+ or PU 413 EL+.
The hardened seal is suitable for use in commercial and industrial locations where an antistatic or electrically conductive flooring is required. Thanks to the special conductive filler, very consistent conductive flooring can be produced that is especially suitable for use in the electronics or electro-technical industries.
Download Data Sheet for PU 881 EL
Polyurethane Solvented – High Build – Very tough
FC Elastomer Kollerdur MO121 is a moisture-curing polyurethane resin based on Toluene diisocyanate. It is totally soluble and dilutable with xylene thereby eliminating the need to use expensive ester solvents. Kollerdur MO121/22%, a 22% NVC for immediate use. Kollerdur MO121/40% a 40% NVC for immediate use.
Download Data Sheet for Elastomer Kollerdur
Crystal Clear [Matt & Gloss] – Brickwork & Timber
CRYSTAL CLEAR is a single pack water based polyurethane dispersion with an acrylic mix. It is completely non hazardous and as such is suitable for application in both internal and external applications and in small confined areas as well as larger, more exposed areas.
CRYSTAL CLEAR will adhere to most substrates and form to give a high gloss film. Once fully cured CRYSTAL CLEAR is hard wearing and offers good chemical resistance against a large number of aggressive chemicals.
CRYSTAL CLEAR can be used on concrete, stone, brickwork, wood, and most traditional building materials, as well as on aluminum, brass, copper brightwork, and some plastics.
Download Data Sheet for Crystal Clear
Coatings
Each product carries a very brief description, with the Data Sheet giving detailed technical specifications and guides on the use of the product and its application.
If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email: enquiries@klbresins.com
KLB EP 740 E is a 2-component, water-emulsified, pigmented epoxy-resin seal.
EP 740 E is mainly used a seal on concrete, cement screeds, magnesia screeds and mastic asphalt, as well as for the renovation of existing surfaces as it has excellent adhesion to a wide range, including existing substrates.
The product is easy to apply by roller, has high coverage capacity and, due to its composition, is pleasant to use and environmentally friendly. In two coats, a durable and visually appealing flooring seal can be produced.
Download Data Sheet for KLB EP 740 E
KLB EP 216 Universal
KLB EP 216 Universal is a universal, solvent-free, pigmented 2-component multi purpose binder based on epoxy resin for hard industrial coatings. It is high-grade adjusted and strongly pigmented. Because of its low viscosity the product is suitable for rolled coatings as well as a top-coat for scattered, grit coats.
The material is suitable for layers starting at 1.5 – 4.0 mm thickness for smooth coatings. The coating material may be filled with up to 0.7 parts by weight quartz sand (grain size 0.1/0.3 mm). Blending with quartz sand is both beneficial and economical, for thickness above 2 mm. The coating material has excellent features in self leveling, easy application, and smoothing.
Download Data Sheet for KLB EP 216
KLB EP 282 WHG
KLB EP 282 WHG is a crack-bridging and solvent- free, 2-component epoxy resin free-flow coating with excellent chemical resistance.
The coating is suitable for use in collection bays and areas, such as in production / handling areas and storage / packing areas that must be equipped with approved coating systems.
The product will withstand forklift-truck traffic and has very good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts, etc.
Download Data Sheet for KLB EP 282 WHG
KLB EP 285 CR
KLB EP 285 CR is a solvent-free, 2-component epoxy resin-free-flow coating with increased chemical resistance. The hardened coating is suitable for use in commercial and industrial locations in which high chemical resistance is required. The range of uses extends to many industrial and commercial situations in which the resistance properties of the coating are foremost.
EP 285 CR is provided with good resistance to chemicals such as e.g. alkalis, oils, grease, water, salt solutions, and various acids. To ensure that the coating is suitable for your application, refer to the resistances chart and request advice.
Download Data Sheet for KLB EP 285 CR
Colours – 12 standard RAL colours
Primers
For ease of use we have divided Primers into two groups i.e. those for Dry Concrete and those for Moist Concrete.
Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.
If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email: enquiries@klbresins.com
Primers – Dry Concrete
KLB EP 30 is an unfilled, low viscosity and colourless epoxy-resin for producing primers, scratch coats and thick-coat smoothing compounds. EP 30 has excellent adhesion properties, can be highly filled and yet has good application properties. EP 30 has a good, consistent cure and excellent bond to mineral substrates. Broadcasting the surface with quartz sand, 0.3 / 0.8 grade, to provide a mechanical bond is highly recommended.
Download Data Sheet for KLB EP 30
KLB EP 50
KLB EP 50 is a high-quality, solvent-free, 2-component epoxy resin for universal application. EP 50 can be used as a primer, scratch-coat, or leveling mortar in renovation and new-build work. Due to its low viscosity and good surface
wetting properties, the resin penetrates well into the substrate and provides a high strength base for subsequent coating materials.
EP 50 has, for many years, been our first recommendation for substrate preparation as it works reliably under all the various construction conditions.
Download Data Sheet for KLB EP 50
KLB EP 51 RAPID S
KLB EP 51 RAPID S is a solvent-free, 2-component epoxy resin that cures at low temperatures and, at normal temperatures, cures rapidly. It is used as a primer and smoothing coat in cases where a fast coating installation is required.
EP 51 RAPID S can usually be over-coated after 2 – 4 hours and has, therefore, a great time advantage over other primers. The use of EP 51 RAPID S offers considerable time savings in small areas and in renovation work with short installation and setting times. EP 51 RAPID S cures reliably even at temperatures down to 0°C and this is a considerable advantage in the colder seasons of the year.
Download Data Sheet for KLB EP 51 S
CRYSTAL CLEAR
CRYSTAL CLEAR is a single-pack water-based polyurethane dispersion with an acrylic mix. It is completely nonhazardous and as such is suitable for application in both internal and external applications and in small confined areas as well as larger, more exposed areas.
CRYSTAL CLEAR will adhere to most substrates and form to give a high gloss film. Once fully cured CRYSTAL CLEAR is hard wearing and offers good chemical resistance against a large number of aggressive chemicals.
CRYSTAL CLEAR can be used on concrete, stone, brickwork, wood, and most traditional building materials, as well as on aluminum, brass, copper brightwork, and some plastics.
Download Data Sheet for Crystal Clear
Primers – Moist Concrete
KLB EP 52
KLB EP 52 is a solvent-free, 2-component epoxy resin that is formulated to have high resistance to moisture. EP 52 will bond to surface-dry damp substrates, suppresses the water content, and achieves an exceptional bond. In combination
with the degreasing agent, PS 22, oil-contaminated surfaces can be cleaned and then primed. Due to its especially good penetration and bonding properties, the product is proven to be effective on poor quality substrates.
In particular, on substrates with inadequate strength, the bond strength achieved can be significantly improved. Its medium viscosity makes the product suitable for use as a scratch-coat and also for use as a wet bonding agent for bonded screeds. The best adhesion is achieved on shot-blasted surfaces.
Download Data Sheet for KLB EP 52
KLB EP 52 RAPID
KLB EP 52 RAPID is a rapid setting, solvent-free, 2-component epoxy resin formulated to be extremely compatible with moisture. EP 52 RAPID will bond to matt-damp surfaces, displacing the water and providing exceptional adhesion. As a variant of the proven special resin primer EP 52, the product is rapid setting and combines good adhesion and wetting properties with early readiness for over-coating after only 4 – 6 hours.
It is suitable for use as a primer on problem substrates at temperatures from 5 °C. The product is primarily for use on concrete and cement screeds where there is a need for rapid setting and good adhesion. Its medium viscosity makes the product also suitable as a scratch coat and as a wet bonding agent for bonded screeds. With KLB EP 52 Rapid, excellent adhesion is achieved on shot-blasted steel.
Download Data Sheet for KLB EP 52 Rapid